Naming and coding style convention, new linter tool. (#945)

* Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
parent c98e54da10
commit 389ff92cc1
899 changed files with 379245 additions and 373421 deletions
@@ -0,0 +1,102 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    hw_if.h
+  * @author  MCD Application Team
+  * @brief   Hardware Interface
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef HW_IF_H
+#define HW_IF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32wbxx.h"
+#include "stm32wbxx_ll_exti.h"
+#include "stm32wbxx_ll_system.h"
+#include "stm32wbxx_ll_rcc.h"
+#include "stm32wbxx_ll_ipcc.h"
+#include "stm32wbxx_ll_bus.h"
+#include "stm32wbxx_ll_pwr.h"
+#include "stm32wbxx_ll_cortex.h"
+#include "stm32wbxx_ll_utils.h"
+#include "stm32wbxx_ll_hsem.h"
+#include "stm32wbxx_ll_gpio.h"
+#include "stm32wbxx_ll_rtc.h"
+
+#ifdef USE_STM32WBXX_USB_DONGLE
+#include "stm32wbxx_usb_dongle.h"
+#endif
+#ifdef USE_STM32WBXX_NUCLEO
+#include "stm32wbxx_nucleo.h"
+#endif
+#ifdef USE_X_NUCLEO_EPD
+#include "x_nucleo_epd.h"
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/******************************************************************************
+   * HW UART
+   ******************************************************************************/
+typedef enum {
+    hw_uart1,
+    hw_uart2,
+    hw_lpuart1,
+} hw_uart_id_t;
+
+typedef enum {
+    hw_uart_ok,
+    hw_uart_error,
+    hw_uart_busy,
+    hw_uart_to,
+} hw_status_t;
+
+void HW_UART_Init(hw_uart_id_t hw_uart_id);
+void HW_UART_Receive_IT(
+    hw_uart_id_t hw_uart_id,
+    uint8_t* pData,
+    uint16_t Size,
+    void (*Callback)(void));
+void HW_UART_Transmit_IT(
+    hw_uart_id_t hw_uart_id,
+    uint8_t* pData,
+    uint16_t Size,
+    void (*Callback)(void));
+hw_status_t
+    HW_UART_Transmit(hw_uart_id_t hw_uart_id, uint8_t* p_data, uint16_t size, uint32_t timeout);
+hw_status_t HW_UART_Transmit_DMA(
+    hw_uart_id_t hw_uart_id,
+    uint8_t* p_data,
+    uint16_t size,
+    void (*Callback)(void));
+void HW_UART_Interrupt_Handler(hw_uart_id_t hw_uart_id);
+void HW_UART_DMA_Interrupt_Handler(hw_uart_id_t hw_uart_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*HW_IF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/