Naming and coding style convention, new linter tool. (#945)

* Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
parent c98e54da10
commit 389ff92cc1
899 changed files with 379245 additions and 373421 deletions
@@ -0,0 +1,136 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+  * File Name          : App/tl_dbg_conf.h
+  * Description        : Debug configuration file for stm32wpan transport layer interface.
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __TL_DBG_CONF_H
+#define __TL_DBG_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* USER CODE BEGIN Tl_Conf */
+
+/* Includes ------------------------------------------------------------------*/
+#include "app_conf.h" /* required as some configuration used in dbg_trace.h are set there */
+#include "dbg_trace.h"
+#include "hw_if.h"
+#include <furi_hal.h>
+
+/**
+ * Enable or Disable traces
+ * The raw data output is the hci binary packet format as specified by the BT specification *
+ */
+#define TL_SHCI_CMD_DBG_EN 1 /* Reports System commands sent to CPU2 and the command response */
+#define TL_SHCI_CMD_DBG_RAW_EN \
+    0 /* Reports raw data System commands sent to CPU2 and the command response */
+#define TL_SHCI_EVT_DBG_EN 1 /* Reports System Asynchronous Events received from CPU2 */
+#define TL_SHCI_EVT_DBG_RAW_EN \
+    0 /* Reports raw data System Asynchronous Events received from CPU2 */
+
+#define TL_HCI_CMD_DBG_EN 1 /* Reports BLE command sent to CPU2 and the command response */
+#define TL_HCI_CMD_DBG_RAW_EN \
+    0 /* Reports raw data BLE command sent to CPU2 and the command response */
+#define TL_HCI_EVT_DBG_EN 1 /* Reports BLE Asynchronous Events received from CPU2 */
+#define TL_HCI_EVT_DBG_RAW_EN 0 /* Reports raw data BLE Asynchronous Events received from CPU2 */
+
+#define TL_MM_DBG_EN 1 /* Reports the informations of the buffer released to CPU2 */
+
+/**
+ * System Transport Layer
+ */
+#if(TL_SHCI_CMD_DBG_EN != 0)
+#define TL_SHCI_CMD_DBG_MSG PRINT_MESG_DBG
+#define TL_SHCI_CMD_DBG_BUF PRINT_LOG_BUFF_DBG
+#else
+#define TL_SHCI_CMD_DBG_MSG(...)
+#define TL_SHCI_CMD_DBG_BUF(...)
+#endif
+
+#if(TL_SHCI_CMD_DBG_RAW_EN != 0)
+#define TL_SHCI_CMD_DBG_RAW(_PDATA_, _SIZE_) furi_hal_console_tx_with_new_line(_PDATA_, _SIZE_)
+#else
+#define TL_SHCI_CMD_DBG_RAW(...)
+#endif
+
+#if(TL_SHCI_EVT_DBG_EN != 0)
+#define TL_SHCI_EVT_DBG_MSG PRINT_MESG_DBG
+#define TL_SHCI_EVT_DBG_BUF PRINT_LOG_BUFF_DBG
+#else
+#define TL_SHCI_EVT_DBG_MSG(...)
+#define TL_SHCI_EVT_DBG_BUF(...)
+#endif
+
+#if(TL_SHCI_EVT_DBG_RAW_EN != 0)
+#define TL_SHCI_EVT_DBG_RAW(_PDATA_, _SIZE_) furi_hal_console_tx_with_new_line(_PDATA_, _SIZE_)
+#else
+#define TL_SHCI_EVT_DBG_RAW(...)
+#endif
+
+/**
+ * BLE Transport Layer
+ */
+#if(TL_HCI_CMD_DBG_EN != 0)
+#define TL_HCI_CMD_DBG_MSG PRINT_MESG_DBG
+#define TL_HCI_CMD_DBG_BUF PRINT_LOG_BUFF_DBG
+#else
+#define TL_HCI_CMD_DBG_MSG(...)
+#define TL_HCI_CMD_DBG_BUF(...)
+#endif
+
+#if(TL_HCI_CMD_DBG_RAW_EN != 0)
+#define TL_HCI_CMD_DBG_RAW(_PDATA_, _SIZE_) furi_hal_console_tx_with_new_line(_PDATA_, _SIZE_)
+#else
+#define TL_HCI_CMD_DBG_RAW(...)
+#endif
+
+#if(TL_HCI_EVT_DBG_EN != 0)
+#define TL_HCI_EVT_DBG_MSG PRINT_MESG_DBG
+#define TL_HCI_EVT_DBG_BUF PRINT_LOG_BUFF_DBG
+#else
+#define TL_HCI_EVT_DBG_MSG(...)
+#define TL_HCI_EVT_DBG_BUF(...)
+#endif
+
+#if(TL_HCI_EVT_DBG_RAW_EN != 0)
+#define TL_HCI_EVT_DBG_RAW(_PDATA_, _SIZE_) furi_hal_console_tx_with_new_line(_PDATA_, _SIZE_)
+#else
+#define TL_HCI_EVT_DBG_RAW(...)
+#endif
+
+/**
+ * Memory Manager - Released buffer tracing
+ */
+#if(TL_MM_DBG_EN != 0)
+#define TL_MM_DBG_MSG PRINT_MESG_DBG
+#else
+#define TL_MM_DBG_MSG(...)
+#endif
+
+/* USER CODE END Tl_Conf */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__TL_DBG_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/